Balacchi RomeoBALACCHIENGINEERING YOUR NEXT MOVE

HF WELDING / BELLOWS

BR600OR.

Specialised HF welding.
Built for bellows.

An 8 kW high-frequency welding machine specialised in bellows production. Its tilting worktable, micrometric electrode adjustment and separate touchscreen console support controlled welding of compatible plastic materials.

8 kWHF output power
27.125 MHzOperating frequency
Up to 90°Worktable tilt

CONTROL AT THE WELD

Set the gap.
Position the material.
Repeat the process.

Specialised in bellows welding, the BR600OR combines a 1200 × 1000 mm useful work surface with a worktable that can tilt vertically up to 90°. Two micrometric knobs allow precise adjustment of the distance between the welding electrodes to suit the material thickness.

The separate operator console brings touchscreen settings and an analogue ammeter within reach. The PLC manages welding parameters and monitors the process, with alarms when configured limits are exceeded.

01

Tilting worktable

Adjust the worktable orientation up to 90° to suit the positioning and handling requirements of the component.

02

Micrometric adjustment

Two adjustment knobs set the electrode gap precisely for the thickness of the material being welded.

03

Stored process recipes

Save and recall welding settings from the touchscreen, including pressing, pre-welding, welding and cooling times.

MATERIAL AND JOINT

Welding solutions
for bellows.

The BR600OR is specialised in the production of bellows using high-frequency welding. Material compatibility, bellows geometry and the required joint determine the electrode design and process settings.

Share your drawings and material samples with Balacchi to define the tooling and assess the application.

  • Bellows production
  • HF-weldable plastics
  • Application-specific electrodes
  • Repeat production
BR600OR high-frequency welding machines for bellows production
BR600OR machines with separate touchscreen consoles for bellows production.

PROCESS CONTROL

Settings that follow
your welding cycle.

Coordinate pressure, power and timing through the Balacchi PLC and touchscreen interface.

BR600OR bellows welding machine with separate touchscreen console
Welding and cooling parameters

Set pressing, pre-welding, welding and cooling times, together with initial and final welding power. Saved recipes help recall the settings for repeat work.

Recipe storage and USB export

Processing recipes can be saved, recalled and modified through the HMI. Recipe data can be exported to a USB drive for review on a computer.

Monitoring and alarms

The control system monitors the welding process and provides visible and audible alarms. The analogue ammeter gives the operator an indication of generator output during welding.

Optional Industry 4.0 module

With the optional Industry 4.0 module, the Orders page displays the current order and its progress. Discuss this option with Balacchi when defining the machine configuration.

BR600OR AT A GLANCE

Technical specifications

Specifications for the BR600OR configuration documented in the 2026 user manual. Confirm the selected machine, tooling and installation requirements with Balacchi.

BR600OR technical specifications
TechnologyHigh-frequency welding
HF output power8 kW
Input power10 kVA
Operating frequency27.125 MHz
Frequency stability± 0.6%
Useful work surface1200 × 1000 mm
Worktable tiltUp to 90°
Pressing force1200 kgf
Pressure regulator range0–10 bar
Power supply400 V AC, three-phase + neutral + protective earth
Generator valveITL-5
Electrode gap adjustmentTwo micrometric adjustment knobs
Control systemPLC with touchscreen HMI and recipe storage
Operating temperature+10°C to +45°C

LET’S DEFINE YOUR PROCESS

Discuss your BR600OR.

Send your bellows drawings, material samples and welding requirements. Our team will help define the machine setup and electrodes for your application.

← Back to all HF welders